Wireless Light Switch Kit with 2 Gang Switch White and 2pcs 500W Receiver

No WiFi Required, Easy to Install On/Off, Self-powered Kinetic Remote Controlled Light Switch 2 Gang and 2 units of 500W Receiver ,White [Energy Class A+++]

  •   SKU - WS1014 + WS1016 (2)

  • Description
  • Specifications


    • NO BATTERRIES NO WIRING NO WIFI REQUIRED-- ECO-FRIENDLY, Our Wireless Kinetic Switch can be Installed Anywhere Without Running Wires. The Receiver is Wired between the Light Fixture and the Power Supply. The Key Panel does no need any Wired Connection. Wireless Remote Control Enables Easy Operation Anywhere, Anytime. The effective Range Between the Transmitter and the Receiver is Approximately 30 meters Indoors* and Approximately 160 Meters Outdoors.
    • SECURITY RF WIRELESS SIGNAL-- ENER-J's Wireless Kinetic Switch Kits Includes a Wireless Key Panel and a RF Receiver. The RF Receiver Connect to Neutral Wire and Live Wire. The Switch Key Panel Use Micro Energy Acquisition Technology and Powered by Pressing the Switch Panel,so it can work without battery.
    • EASY To INSTALL & SAFETY -- Built-in Self-protected & Fused (Normal 5A,Max load 5A). Receiver is simply wired between the Light Fixture and the Power Supply. The switch does not require any wiring connection.The wall switch kit is self-powered and can be used with any light; halogen, incandescent, CFL bulbs, fluorescent tubes, LED lighting, etc.
    • WATERPROOF AND ULTRA THIN DESIGN--Remote Controlled Light Switch with Slim and Waterproof IP65 Enables design ,it can be Used under Certain Special Conditions.So you can even install it outside.
    • DURABLE & FLEXIBLE CODING-- Designed with Ultra-low Power Consumption, It can Run up to 200,000 Hours,Last 20 years lifetime. one switch control multiple lights or multiple switches control one light, like 1-2 way, 3-way, multi-ways switch.(Separated Switch and Receiver are Sold in Our Store for More Control Combination)


Do you want to move or add your light switch without wiring?
Do you want to renovate an older house without pulling wires?
Do you have a lamp that you'd like to control from across the room?

Now all the problems will be resolved after your choose our product
ENER-J's wireless light switch to do just that - No Wire! No Battery! No WiFi! Add the light switch quickly and easily. Move or add the switch anywhere!

? Two easy steps for pairing:
1. Press the function button for 3 seconds(indicator light will flash slowly.) Then release the function button. Now the controller is ready to pair.
2. Press the desired gang on the Switch and the indicator light will stop flashing which means the pairing was successful.


Switch Technical Parameters
Power Supply: Micro energy acquisition and self generating power
Communication Mode:FSK
Operating Frequency: 433MHz
Control Distance: 30m (indoor), 160m (outdoor)
Control Method: Pairing with ENER-J wireless receiver
Waterproof: IP65 for Switches
Number of Gangs (Keys): 2
Usage On/Off Times: 200,000
Dimensions: L3.4in x W3.4in x H0.6in
Weight: 88g
Waterproof: Yes

Receiver Technical Parameters
Power Type: AC85-260V, 50/60Hz
Voltage Range: 85V-260V
Sensitivity: -110dB
Control Distance: 30m (indoor), 160m (outdoor)
Control Method: Pairing with Thinkbee® switch
Load: 5A max 16A, 500W(Resistive load), (LED 500W)
Waterproof: No

Package Included:
1 x Self-powered switch 2 gang White Body
2 x 500W Remote receiver
1pc x 3M adhesive tape
2pcs x Manual(Switch&Receiver Each)

You May Also Need...